Login

Forgot password?

We love free and open web!

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - losit

Pages: [1]
1
VPN Client Setup Support / VPN Enabled, but cannot access services
« on: March 12, 2018, 07:00:13 AM »
Hi Guys,

I have setup a vpn with the shrew vpn client to an netgear prosafe firewall.
The tunnel is enabled, but I cannot reach anything on the other side.

Could it be that there is no correct route?
When I enter route print on the client side I see the foloowing:

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0     192.168.10.1   192.168.10.101     20
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
       172.16.0.0    255.255.255.0         On-link        198.18.0.0     31
     172.16.0.255  255.255.255.255         On-link        198.18.0.0    286
     192.168.10.0    255.255.255.0         On-link    192.168.10.101    276
   192.168.10.101  255.255.255.255         On-link    192.168.10.101    276
   192.168.10.255  255.255.255.255         On-link    192.168.10.101    276
       198.18.0.0      255.254.0.0         On-link        198.18.0.0    286
       198.18.0.0  255.255.255.255         On-link        198.18.0.0    286
   198.19.255.255  255.255.255.255         On-link        198.18.0.0    286
  217.100.120.106  255.255.255.255     192.168.10.1   192.168.10.101     21
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
        224.0.0.0        240.0.0.0         On-link    192.168.10.101    276
        224.0.0.0        240.0.0.0         On-link        198.18.0.0    286
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
  255.255.255.255  255.255.255.255         On-link    192.168.10.101    276
  255.255.255.255  255.255.255.255         On-link        198.18.0.0    286

local client ip is 192.168.10.101
virtual network of the shrew client 198.18.0.0
remote internal network is 172.16.0.0

Can anyone help me out here?

Pages: [1]