Technical Forums > VPN Client Setup Support |
VPN Enabled, but cannot access services |
(1/1) |
losit:
Hi Guys, I have setup a vpn with the shrew vpn client to an netgear prosafe firewall. The tunnel is enabled, but I cannot reach anything on the other side. Could it be that there is no correct route? When I enter route print on the client side I see the foloowing: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.10.1 192.168.10.101 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.0.0 255.255.255.0 On-link 198.18.0.0 31 172.16.0.255 255.255.255.255 On-link 198.18.0.0 286 192.168.10.0 255.255.255.0 On-link 192.168.10.101 276 192.168.10.101 255.255.255.255 On-link 192.168.10.101 276 192.168.10.255 255.255.255.255 On-link 192.168.10.101 276 198.18.0.0 255.254.0.0 On-link 198.18.0.0 286 198.18.0.0 255.255.255.255 On-link 198.18.0.0 286 198.19.255.255 255.255.255.255 On-link 198.18.0.0 286 217.100.120.106 255.255.255.255 192.168.10.1 192.168.10.101 21 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.10.101 276 224.0.0.0 240.0.0.0 On-link 198.18.0.0 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.10.101 276 255.255.255.255 255.255.255.255 On-link 198.18.0.0 286 local client ip is 192.168.10.101 virtual network of the shrew client 198.18.0.0 remote internal network is 172.16.0.0 Can anyone help me out here? |
Navigation |
Message Index |