| Technical Forums > VPN Client Setup Support |
| VPN configuration |
| (1/1) |
| glee:
Are these settings right for accessing my network from a NAT'd dynamic IP connection? --- Quote ---Remote IPSec Gateway Address 0.0.0.0 Tunnel access from local IP address: Subnet IP Address for VPN (local): 192.168.2.1 IP Subnet Mask (local): 255.255.0.0 Tunnel ACcess from remote IP address Single address IP Address for VPN (remote): 192.168.2.2 IP Subnet mask (remote): N/A Protocol: ESP Key Exchange Method: Auto Authentication Method: Pre-Shared Key Pre-Shared Key: XXXXX Local/Remote ID Type: IP/IP Local/Remote ID Content: 192.168.2.1/192.168.2.2 --- End quote --- My network is in the 192.168.1.x range with a 255.255.255.0 subnet. I have a Zyxel P660HN-51, with a desktop (192.168.1.2), xbox (192.168.1.2), and a printer (192.168.1.3). The Zyxel is 192.168.1.1. |
| Navigation |
| Message Index |